***Includes the redesigned oem stock that is slightly different than the original design. The pictures show the original style stock.***
The weight of the Vector tiring you out? Do you desire to shoot the vector single handed? Well look no further! Yeti Wurks is proud to present you with its very own Kriss Vector Tail hook kit!! It included the folding assembly(newest generation) Tailhook adapter, and Tailhook brace! Just remove the "stock" portion from the folding assembly and install the adapter! Viola! You now have a braced Vector! The best part is that the brace even allow you to use the stock catch when the assembly is folded! This kit is compatible only with pre-2017 vectors with the hinge built into the rear.
The YW Vector Tailhook adapter is made out of black anodized 6061 aluminum for long life and durability. Length of pull (from trigger face to back of assembly) with the adapter and Tailhook installed is adjustable between 12.5" and 13.5". Due to the general design LOP could be adjusted longer, but it is not recommended as and LOP longer than 13.5" could make it considered a stock and not a brace.
THIS IS A COMPLETE KIT!!! FOR USE ONE GEN 1 & GEN 2 VECTORS WITH THE FOLDING HINGE ON THE REAR OF THE RECEIVER. SPD VECTORS WITH THE HINGE AND REAR SLING ADAPTER WILL NEED THE PIN ON THE HINGE DRILLED OUT TO INSTALL THE FOLDING ADAPTER. REMOVE THE BUTT STOCK FROM THE FOLDING ADAPTER BEFORE ATTACHING IT TO THE VECTOR. FAILURE TO DO SO COULD RESULT IN THE UNLAWFUL CREATION OF AN NFA ITEM. YETI WURKS IS NOT RESPONSIBLE FOR THE END USER VIOLATING ANY LOCAL OR FEDERAL LAWS.
IF YOU HAVE A VECTOR WITH A BUFFER TUBE UPPER YOU ALSO NEED THE FOLLOWING TO USE THIS KIT:
The lower tang of the folding assembly can be retained without preventing operation of the brace, but it is recommended that it is removed to prevent any confusion as to your intent with installing the brace.
Remember that the brace can be installed and occasionally shouldered without changing your pistol into an SBR, but if you intend to use the brace as a stock you could be breaking NFA laws without a tax stamp.
Note: the adapter shown in the product pictures is a prototype. Actual adapters with CNC'd from 6061 aluminum and black anodized. Also the pictures show the original style folding assembly, but the new style is what is included.